Germinate your marijuana seeds safely ✅ 100% EFFECTIVE ✅ All the steps to germinate your marijuana seeds ✌️ Guaranteed effectiveness ✌️ Seeds are expensive, having them all germinate is achievable with these easy germination techniques. You'll be growing in no time! THE BASICS Like almost everything else about growing excellent Cannabis, germinating your seeds successfully is pretty simple. We’ve used this very basic, inexpensive method for many years and have shared it among thousands of growers worldwide who have all had excellent results with no issues. First make a mix in the
Germinating seeds safely
You can find different methods to germinate seeds of marijuana of sure form, but the primordial thing to consider is the temperature of the place where they are going to germinate, since the ambient temperature is what is going to guarantee the success of a harvest, since so much by excess or by defect, your varieties of marijuana can suffer the variations, therefore the best thing is to contribute a stable environment, watching that the seeds are between the 26ºC and 27ºC.
To germinate seeds of marijuana securely, put to soak your seeds of marijuana a few hours before, and in a tupper, places a base of wet napkins, without they get to soak, distribute the seeds above and cover them with other napkins in the same way. Close the tupper and place it on a heat source that does not become very high, an electronic device for example, and that does not receive much light. After a day or two, when you see that the root begins to emerge, you can pass them very carefully to a small pot.
For your seed plantation to be effective, you have to follow a series of steps, obviously, as with all plants, you have to provide them with water, to which you can add oxygenated water, which has anti-fungal properties and helps the water have more oxygen. Then you have to decide where you want the germination to take place, and make sure that the environment and temperature of the place is the right one
⭐ How to germinate marijuana seeds in an easy and homemade way?
A very easy and useful process, is to put the seeds in a glass of water and let them rest until you see that the root begins to come out, when this happens and very carefully, you can transplant them without introducing them very deep into the ground, allowing them to come to light.
How to germinate marijuana seeds in propagators?
- There are some discs of pressed peat where the seeds can be germinated and it is one of the most used means.
- In first place it is necessary to moisten the seeds in water, better if it is bottled, because the one of the tap contains lime that can spoil the seeds and let rest in a dark place during 48 – 72 hours until they throw the root.
- Hydrate the germinators with mineral water and wait for them to swell, then make a small hole and put the root, leaving the head of the seed flush..
- To maintain the humidified seeds, to a temperature of between 21ºc and 23ºC and under a powerful light..
- To germinate seeds of marijuana in flowerpot, is another of the methods used at the time of germinating your roots, since it makes that the phenomenon known as gravitropismo takes place, that makes that in addition to growing to a more accelerated rhythm, causes the basipetal growth of the roots and that the leaves of the plant grow upwards
- Leave the seeds to soak for at least 12 hours to properly hydrate the shell and sterilize the soil with quality substrates such as worm humus.
- You should put one seed per pot, so that they do not get in the way, moisten the soil and introduce the roots. Leave the pots in a warm and dark place until you see that the plant begins to emerge, at which point you can place it in the light..
- A very habitual practice between the Cannalovers, it is to conserve seeds of marijuana, in a box of conservation like for example the Box 00 Box, and later passed a time to germinate them, they are the known commonly as “old marijuana”, but it is necessary to take into account certain aspects before you begin the culture.
- If you’ve been careful about saving the seeds, you shouldn’t have any problems. I always use the 00 Box, which, with its humidity control, provides an unparalleled conservation habitat.
- -You will also have more options to germinate if the seeds do not have more than a year and a half, from that time, the shell is hardening and the chances of the root coming out dive.
In this video you can see how one of our experts gives you some basic tips on how to germinate your marijuana seeds
When is the best time to germinate marijuana seeds?
The best time to germinate marijuana seeds is spring. The temperature is warm but without being exaggerated, avoiding that your plants suffer an excess of light and heat that spoils them. In spite of it, if we have precaution, we can germinate seeds throughout the year.
Time of germination of seeds of marijuana
The time of germination of the seeds of marijuana, can be faster or less. It varies in function of many aspects, temperature, environment, genetics and age of the seed, method that you use for the germination, humidity, light, etc.
The seeds of marijuana can take to germinate, between 2 or 10 days, alone you must have patience and to watch that the conditions of the seed are the suitable ones, see, it is humidified and in a dark place.
✨ What are the different ways to germinate? Which is the best?
First, I’m going to do a review of the basic conditions that we must meet before we begin to germinate your marijuana seeds. The first condition to take into account to germinate your marijuana seeds, is to provide humidity, that is to say, water. This can come from the tap as long as its EC does not surpass 1, in addition its PH will have to be placed in a value near the 6, with a suitable temperature of approximately 22 degrees.
Later you must choose the method with which you want to germinate your seeds, which can be:
– To germinate seeds of marijuana by means of Jiffy o or Presses of Peat.
They are dehydrated and pressed peat tablets, are left to soak until they become a bag full of substrate. There are different sizes and coconut fiber instead of peat, and its main characteristic is that it retains a large amount of water, so during germination you should not water again.
– To germinate seeds of cannabis by means of Cubes of Wool of Rock.
If you opt for a hydroponic cultivation, no doubt germinate marijuana seeds in cubes of rock wool, is your best option, as they do not dirty the cultivation system and the seeds germinate very fast with this method. It dries very quickly, so you will have to constantly monitor the humidity.
– To germinate seeds of cannabis with Napkins of Paper.
This system is the most used by all to germinate marijuana seeds, especially because it is the cheapest and simplest. It simply consists of placing kitchen paper on a container such as a plate and humidify it, the more kitchen paper you put, the greater the humidity will be retained and less will have to hydrate later.
Once moistened, the seeds are placed on top and covered with another plate leaving space between them so that the seed breathes well. You have to keep in mind, that never ever the paper dries, so you have to be aware of the humidity.
– Germinate marijuana seeds with Propagation Tacos Rootit
The Rootit propagation blocks are like small sponges so that the seed takes root well. They are totally biodegradable. Their use is similar to rock wool taco.
How to germinate marijuana seeds in soil?
Germinate marijuana seeds in soil, is the method most used by the vast majority of growers, especially among growers who are not professionally engaged in growing cannabis. I am going to give you a series of advices and indications, so that you can germinate your seeds of marijuana in ground, without making mistakes and is everything a success.
- Control the PH of the water and of the earth, with specific apparatuses for the measurement of the PH.
- Prepare all the material before starting, Don’t forget anything! You must have all the fertilizers and fertilizers you will need prepared.
- Analyze your climate and the characteristics of your seeds, it is very important that you choose well. Because, you must know perfectly the characteristics of your seed, in order to get the best out of it.
If you use mother earth to germinate your marijuana seeds, you will obtain many better results, and if you place it in the zone of the suitable garden where it receives the hours of light that they need to grow strong and healthy, you will obtain a much greater productivity.
The most commonly used method of germinating is soil.
How to germinate with coconut fiber?
Germinating marijuana seeds with coconut fiber, is very effective thanks to the oxygenation capacity of the coconut, which helps a lot to the development of the roots, getting to obtain a 90% germination level. We are going to go step by step:
- It works well the coconut fiber with the hands, so that not even a single compaction remains, to later place it in the flowerpot where we are going to make the germination.
- Hydrate the coconut fibre very well, with quality water.
- Once well hydrated, make a hole of no more than 1 cm to place the seed.
- Cover the seed well, and add a couple of drops of water.
Now simply maintain a good hydration and stable temperature, leaving nature to run its course. The fundamental advantages of coconut substrate, is that they allow a greater root growth than other types of substrates, and collect moisture very well, your seeds will grow and become larger plants and therefore with higher levels of productivity.
How to germinate with jiffys?
To germinate seeds of cannabis with Jiffys is one of the most effective methods, and with more rate of success of all. The Jiffys or pressed peat are some germinators that are introduced in a hermetic receptacle and they are humidified until they reach their complete size, next a small hole is made in the center and the root of the seed is introduced that previously we will have left in soak during 24 hours in a glass of mineral water, that contains a PH of 6,5 to a temperature of approximately 20 degrees. This step is not essential, but it helps the seed to open more easily afterwards.
Then we must cover the container and let it rest in a dark place and at a warm temperature.
Jiffy or Peat Presses retains a large amount of water
Toilet paper, napkins?
Without a doubt, to germinate seeds of marijuana in hygienic paper will not be possible, since the hygienic paper is designed to dissolve to the contact with the water and not to block the pipes of house, whereas the kitchen paper, is designed to absorb the greater amount of water possible, and this is what will cause that your seeds of marijuana germinate correctly..
Ah! I forgot, always bear in mind when you start the germination of your marijuana seeds with blotting paper, place 30% more of the seeds you want to germinate, because these methods are not infallible and some may not germinate.
Do we use a tupper?
The answer is yes! germinate marijuana seeds in a tupper, it will help you to conserve the humidity of the napkins where we have placed the seeds and in addition it will maintain safe in an environment where the temperature can be controlled much better than if you use a plate. In winter remember that it will be ideal, if you place the tupper on top of the TV, and you will get a pleasant interior temperature of about 20 degrees.
How to germinate with alcohol?
The use of alcohol to germinate marijuana seeds, can lead to the seeds die or burn, it is much better method to use oxygenated water where we will soak them, this will provide the seeds more nutrients and oxygen and will help in their growth
How to germinate in cotton?
To germinate your seeds of marijuana in cotton, has a procedure that is basically the same as in humid napkins, the only difference is that it is not necessary to cover the seeds above with another layer of humidified cotton, of this way, although they are in a closed receptacle, it is not necessary to open it neither to remove the layer of above to see if the roots of our plants have begun to leave, which is more favorable at the moment of allowing them to sprout.
To germinate with light or without light?
To germinate your marijuana seeds, it is necessary that they are in the dark, and once the roots have begun to sprout it is time to finish the process of germination of your marijuana seeds placing your plants under the light of the sun or under the focuses of your indoor culture, but until then, the plantation must remain in a closed and covered container and in a dark and humid place.
To germinate your marijuana seeds, it is necessary that they are in the dark
How to germinate with water?
Another of the methods to germinate your marijuana seeds, is using a glass of water, much more comfortable and easy to manipulate that to germinate your marijuana seeds in plate. You must place it in a temperate and dark place between 20-22 degrees, adjusting the PH of the water between 6,0 and 6,5 and later the seeds are sowed. You will have to change this water every 24 hours, or to throw a drop of oxygenated water to avoid that it rots
During the initial process of the germination of your seeds of marijuana in jar with water, these will float on the same one, but as soon as they begin to open between 24 and 72 hours, they will precipitate to the bottom. Once it has appeared already the root, it takes out of the water the cotton or the napkins, and plant them in the flowerpot to a depth of 0,5 to 1 cm.
Remember, that to germinate your seeds of marijuana in water, it is necessary that you use mineral water, although if the water of the faucet of your zone fulfills the requirements of PH you can use it also, but for quality I remain with the mineral water.
Why use hydrogen peroxide?
Using hydrogen peroxide in the process of germination of your cannabis seeds, brings benefits widely demonstrated and I’m going to detail. In the first place, in the case of opting for a germination of your seeds with water in jar, to contribute a drop of oxygenated water to him, avoids that the water rots, and it is necessary to change it every 24 hours. It also eliminates fungi and bacteria thanks to its anti-fungal properties, if you choose to pour water from the tap.
Adding a drop of hydrogen peroxide eliminates fungus and bacteria.
How to germinate with autoflowering seeds?
The autoflowering seeds, are the most cultivated varieties of the moment, especially for the short periods of flowering, and the strength that they present in front of their feminized sisters, and in times in which speed and time dominates our lives, they are acquiring an important notoriety.
Their germination process is identical to that of feminised or regular seeds, so you won’t have to do anything different.
✅ How to germinate marijuana seeds fast step by step
Below we are going to see a daily monitoring of the germination of marijuana seeds between napkins, since from our point of view it is the fastest and safest way. Let’s see a couple of tricks that speed up the process and greatly increase the chances of success:
- We recommend germinating the seeds inside a heated propagator or greenhouse, if possible with a temperature of around 25º C. (This is a slightly higher temperature than recommended, but this accelerates the activation of the germ) and a humidity around 90%.
- We place a plate inside the greenhouse, put a napkin or kitchen paper on top of the plate, put the seeds on the napkin (Separated at least 2 cm between them so that the roots do not get entangled)
- We put another napkin on the seeds and now we have to moisten the whole with a nutrient solution that contains water, root stimulator, and 2 drops of hydrogen peroxide. (It can be moistened with water only, but this mixture accelerates germination and hydrogen peroxide also acts as a disinfectant) Moistening does not mean soaking, in the case of excessive humidity, the ideal would be to wring the napkins a little.
- We close the propagator or greenhouse with its lid and leave its openings or windows closed to maintain humidity and heat, we introduce a thermo-hygrometer or its probe, and we plug the cable into the network to activate the heating.
- From this moment the germination phase of the seeds begins, and you will say, How long does it take for a marijuana seed to germinate? It can last between 2 and 10 days, but as a general rule commercial seeds usually need between 3 and 6 days. It is recommended to open the greenhouse every day to check the condition of the seeds, and in passing we will check the humidity of the napkins in case it is necessary to moisten again.
- Day 1: After approximately 24 hours we can open the greenhouse and carefully separate the napkin located at the top, and I say carefully because some seeds may stick or fall. The first day of the germination phase, as a general rule, hardly any changes will be seen, but if you look closely, some seeds will have acquired a darker tone, it is the sign that they are beginning to hydrate. Other seeds will look exactly the same as before they were put to germinate, because the shell that covers them can be different thicknesses, and those that are very thick take more time for moisture to penetrate.
- Day 2: We opened the greenhouse and the whole to check the condition of the seeds, and the normal thing will be that those seeds that had not begun to hydrate, now look darker, and those that looked darker yesterday, today will be a little bigger, and if you look closely you will see that they start to open a little. The seeds have an oval shape, and if you look at their ends you will see that one of them ends up in a more pointed shape than the other, and that’s where they start to open.
- Day 3: When you open the greenhouse you may notice less humidity than the previous days, and you may have to moisten the napkins. Keep in mind that by maintaining a moderately high temperature (approx. 25º C) the humidity evaporates more easily, but it is really worth it because you can save several days of germination. Those seeds that had begun to open yesterday, today already show the tip of the primary root showing, and you have 2 options, sow them in the substrate now or wait for more roots to show. The writer of this likes to wait until at least 1 cm of root is visible to pass it to the substrate, but there are also people who prefer to wait until they see 2 cm or more. It is advisable to take the seeds with tweezers without touching the root, and remember that the seeds are buried in the substrate with the root facing downwards, at a depth of between half a cm and approximately 2 cm, and it is recommended to water with root stimulator and microlife without soaking the substrate. The seeds that yesterday had barely begun to hydrate, today we can see them larger and already opening, so we leave them germinating, close everything and continue waiting.
- Day 4: We reopen everything to see the state of the seeds, and at this time the most normal thing is that all of them have already hydrated, and those that have not done so may never do so. The small ones usually germinate before the big ones, especially because of the thickness of their shell. If you have large seeds that after 4 or 5 days of germination continue without signs of hydration, you can try a trick that helps in these cases, which is to crack the seedwith your teeth as is usually done to open a sunflower seed. The seeds that have already taken root can be sown just like we did with the first ones, and the first few days in the substrate it is advisable to keep the humidity between 80% and 90%, so it may be a good idea to put the pots in the same greenhouse.
- Day 5: The germinated seeds that we planted in the ground 2 days ago begin to sprout from the ground showing their cotyledons, and from this moment it is crucial to put them under light so that they do not sprout. The ideal is that the first day the light is located at a distance of about 1 meter, the second day at 60 or 70 cm, and from the third we will bring the light source as close as possible as long as it does not exceed 24 or 25º C. We check the state of the napkins to make sure they are not dry or too wet, and we look at the seeds to sow those that have already taken root. Some seeds never germinate, since their viability depends on many factors such as age, conservation, germination method, or even the genetics of the plants, since degeneration influences germination power.
- Day 6: The seedlings that have sprouted from the substrate will be watered with root stimulator and microlife every day or every 2 days, carefully moistening the substrate around the stem but without wetting the entire surface of the pot. Like every day, the germinated seeds that can be transplanted into the substrate are sown, and the rest are left to germinate. We review the data to verify that the humidity and temperature continue in the ideal parameters.
- Day 7: If there are seeds that have not shown signs of hydration, it is very possible that they are not viable and will no longer germinate, because in some cases the embryo stops being dormant due to different problems. However, you can keep trying for a few more days, but as I said before, the vast majority of commercial marijuana seeds need between 3 and 6 days to germinate correctly. Normally, after 7 days this phase can be concluded, since most of the seeds will have germinated and will already be growing, so it is possible to move on to the vegetative growth phase.
Is there any difference according to the strain?
The germination of seeds of marijuana, is the same independently of the race, it will only vary the period of germination that has each variety, but the processes or methods of germination, are all universal, although some of them as we have seen above, they are specially indicated for certain type of culture, because it is where greater yield obtains.
How to use the lunar calendar to germinate my seeds?
For thousands of years the human being, used the different phases of the moon, for agriculture, and today the lunar calendar, is very important to be able to get the highest possible yield from your cannabis plants.
The phases of the moon can exercise a different force based on its position, in many aspects of life, including the cultivation of marijuana and all its stages, including the germination of cannabis seeds
The ideal lunar phase to germinate your marijuana seeds according to the lunar calendar, is the Fourth Increasing phase. During this stage the moon increases the power of its rays, to which the plants respond with increased foliage and root. The end of this stage is the perfect one to germinate your seeds, thus you will begin to plant it the first day of full moon.
We have an application of the lunar calendar that you can download HERE. With it you will know which is the best time to germinate and perform any action related to the crop
⛳ What to do if our seeds do not germinate?
If your seeds do not germinate, it can be the result of several badly executed actions, such as abusively moistening the seeds, or having the temperature above or below what is necessary. It is also possible that the seeds used were not prepared for planting. When these cases occur, we must start again with other seeds.
Remember that if you buy them at PevGrow, we guarantee germination (here more information). If they do not germinate and you have used a suitable method, simply return them to us in the original package and we will replace them immediately.
What to do after germinating?
When your marijuana plant has already germinated, you must pass it already to plantation. Be patient, because during the first week you will see practically no progress, but from then on, the events shoot at a crazy speed.
Is there a difference between winter and summer?
Evidently yes, to germinate your seeds of marijuana in summer, is the logical thing especially if you opt for a culture of outside, since the seeds of marijuana need to have a warm climate and a good dose of solar light, to be able to grow strong and vigorous.
It is always more advisable to start planting well into spring, as temperatures are ideal for the seeds to grab and can deliver their best version.
Also exists the possibility of germinating your seeds of marijuana in winter but for it they are necessary the greenhouses, or that during this epoch, you opt for cultivating your seeds of marijuana in cultures of interior.
All these rooting systems can be purchased in your trusted Grow shop and do your own tests to see which method works best for you personally, since as we have indicated only three of the forms of germination of cannabis seeds … and as they say out there, “every teacher has his booklet”. ?
If you liked this article, share in social networks and I will be eternally grateful! We keep growing!
Also in the comments, you can share opinions and doubts that our cannabis experts will be happy to solve. Grow Cannalovers!
How to Germinate Cannabis Seeds
So you’ve gotten hold of some cannabis seeds and want to make sure they all pop? Seeds are expensive and having them all germinate is achievable, provided they were bred and stored correctly. There are various methods of germination that different cultivators will swear by, from pre soak solutions to the type of medium used.
General Requirements for Germination
Consider a seed falling off a tree in winter. By the time spring comes around the seed may be slightly covered in a light soil, temperatures have risen and rains are starting to fall. These are the basics conditions for a seed to germinate; warmth, water, air and some sort of darkness or cover.
The Seed Soak Germination
This is a part of germination where the seed is soaked for a period of time. Soaking can be in anything from distilled or RO water, to some form of special solution. Solutions can vary from beneficial microbial inoculation or a solution of hydrogen peroxide. The time a seed is soaked can vary from a few minutes to hours or even a day. The soft seed is then carefully transplanted to the growing medium of choice to sprout and grow. It should be noted that seeds can drown and we wouldn’t advise submerging seeds for more than 24 hours.
Hydrogen Peroxide Solution
Hydrogen peroxide is used to sterilize the outer shell of the seed and increase oxygen levels around it. Oxygen is important for gemination and is not uncommon for cultivators to rinse seeds in a weak solution for up to 30 minutes. Add 3ml of 50% hydrogen peroxide to 250ml of water for this method of soaking. Be sure to rinse the seeds well with clean water after soaking. Microbial life of all kinds won’t survive this method, whether it be unwanted fungi spores and bacteria or beneficial microbes.
Beneficial Microbe Solution
An alternative solution is dechlorinated water and beneficial microbes. The seed is then placed in the solution for anything from 30 minutes to a couple of hours. Beneficial organisms fight any “bad guys” around and coat the seed with “good guys.” The microbes will colonize the seedling’s root zone creating a symbiotic relationship between them. Rinsing with clean water afterwards is not necessary.
Paper Towel “Soak”
Many did it at school with paper towels or cotton wool. Seeds are placed in-between soft, water retaining materials in a warm place until a tap root is seen. Paper towels and cotton wool can dry out quickly so check on the moisture content regularly.
Once the tap root reveals itself, gently transfer it to a growing medium or starter plug. Place the sprouted seed tap root down and cover lightly. When transplanting seeds, minimize exposing the root to the elements especially sunlight. Sterilize all tools used and be sure not to break the tap root during transplant, as that can happen too.
Starter Plug Germination
Starter plugs range from rock wool to peat pellets and natural sponges of different kinds. What’s important to note is not to mix your mediums. For example, don’t germinate seeds in rock wool when planning a coco peat finish. A peat pellet or natural sponge would be better suited. For a sterile or inoculated plug to germinate in, add either peroxide or microbes to the water used to soak or expand with.
An old favourite able to hold both air and water well. Produced by the heating of basalt rock and calcium and spun into a sheet. Rock wool naturally has a high pH of 8 and should be soaked in water with a pH of 5.5 – 6 for 30 minutes. Shake excess water off and place the seeds in the designated hole. Pinch the hole closed and place the rock wool in a warm area. Keep the rock wool plug moist but not overly soaked.
Popular in recent years the coco peat pellet is expanded with water and surrounded by a soft material with an opening at the top. It’s pH is naturally around 5.5 but any water or solution used to expand the pellet should also be 5.5. Place the seed gently 1cm to 5mm inside the pellet and cover lightly. Make sure the pellet stays moist but not soaked, allowing for water to drain off.
A sponge shaped like rock wool but made from organic materials like coco peat. When produced, they are pH ready at around 5.5 and in some cases when sold in packs, are already sufficiently soaked too. Like above, place the seed gently inside and place in a warm area making sure they stay moist.
Direct Sowing Germination
You may want to sow your seed directly in the ground in the garden. For that, choose the sunniest spot with a bit of space around as cannabis can get big outdoors. You can soak your seed like above or just get it in there by placing it 5mm – 1cm deep in loosened soil. Keep the area moist and protected, even covered with something clear if preferred.
Cannabis plants become sexually mature and ready to flower from around 6-8 weeks strain depending. This allows for seeds to be planted from spring though to mid-late summer, the longer you wait though, the smaller the yield. Plant your seed in mid spring for vigorous growth during the summer months and a big harvest come autumn.
These are a few of the basic methods used to germinate cannabis seeds although the options are endless. Each method will vary in the time it takes for the seed to break ground, anything from a day or two, to two weeks outdoors with direct sowing. Starting off in the same fashion as vegetable seeds in seed trays are also options for germinating cannabis seeds.
Here are a few more tips for germinating cannabis seed:
If using a propagation dome or some sort of closed environment to increase humidity, the air should be changed daily.
The use of heat mats can greatly increase germination rates, the right temperature can make all the difference.
Like almost everything else about growing excellent Cannabis, germinating your seeds successfully is pretty simple. We’ve used this very basic, inexpensive method for many years and have shared it among thousands of growers worldwide who have all had excellent results with no issues.
First make a mix in the ratio of 1/3 3% hydrogen peroxide to 2/3 distilled water.
It’s important to use only distilled water – some of the common chemicals in tap water can stunt, warp or kill your plant even well past seedling stage when you’ve already spent weeks tending it.
Then soak your seeds in the distilled water/hydrogen peroxide mixture overnight. If you’re growing multiple varieties, be sure to soak them separately. (Don’t laugh. It’s happened.)
Next, pour some of the soak water onto really absorbent paper towels, then wring or squeeze them out lightly and lay them flat. We use 2-3 towels layered together to make a nice thick absorbent nest.
The best seeds often sink and compromised seeds sometimes float, but there are always exceptions to the rule.
Then sprinkle the soaked seeds, using a clean spoon or gloved fingers, onto the moist paper towels, not crowding the seeds.
Then fold the moistened towels over the seeds to make a flat little package.
If you’re sprouting more than 12 seeds at a time, make more than one package – don’t crowd them.
Then put the moist towel and seeds flat inside a closed, unzipped storage-size plastic baggie, laying it flat somewhere away from direct light at room temperature.
In two or three days the seeds will sprout – maybe not all at once, but that’s not a problem because within 24 hours of the first seed sprouting all the others will have sprouted too. Keep your inspection peeks short as not to dehydrate the paper towel.
When the seeds each have a 3/4” root and the halves of the shell are beginning to open noticeably, meaning the embryo leaves are swelling inside, they’re ready.
You then want to move each sprouted seed into a Jiffy Cube you’ve prepared by making a small hole using a pencil or chopstick. Again – be sure you used distilled water to hydrate your Jiffy Cubes and of course use it everywhere else during germination.
Replanted into Jiffys:
Using your fingers, pick up the seed very gently by its shell, and avoid touching the sprouting root as you transfer it into the jiffy cube.
Also remember what’s unfolding inside that little shell as you handle it, be super delicate and stay conscious of the life emerging inside.
Now place the sprouting seed root-down in the hole letting it settle in naturally with the top of the seed even with the top of the hole – never push it down.
If it doesn’t nest right in, lift it out and poke the hole a little deeper. The cells at the tip of that little root hold the most miraculous ecosystem of emerging life one can imagine and while they are incredibly tough in nature they are also vulnerable to our mis-handling.
Now all you have to do is let the new sprouts do their thing they do so well, with a little help from their friends. With a day or so they will raise up their first leaves. Keep them lightly misted if you’re in a dry environment but don’t over-do it.
In a couple of days when they’ve developed their first set of true leaves, not the embryo leaves, it’s time to put them into larger pots with living soil and a mild fertilizer and then let the plants fully establish themselves.
3 Days Later:
10 Days Later:
The same Skunk #1 x Haze seeds are available at:
Is using distilled water really important for germination?
Using distilled water is probably the most important part of the germination process because well water, tap water, bottled water and even rainwater contain traces of contaminants that can inhibit germination and later vegetative growth and flowering.
High chlorine in tap water, herbicides in well water, phthalates in bottled water, as well as many other kinds of common water contaminants can kill or damage germinating seeds and will definitely affect your plant’s health, yield and flower quality.
Can I remove these contaminants with a garden hose filter?
Yes most of them you can. There are a variety of relatively inexpensive filters that screw onto the end of the garden hose that you use to fill containers and water your plants. Some have replaceable screens, while others use granular activated charcoal.
There are also screw-on systems with carbon block filters that run $20-$30 and are very effective at reducing chlorine and chloramine, and at removing pesticides, heavy metals, and herbicides.
What’s some of the science behind using Hydrogen Peroxide for germination?
Here are two core articles from the PubMed database:
“Different Modes of Hydrogen Peroxide Action During Seed Germination”